3 G
S
ETTING
TARTED
U
NPACKING THE INSTRUMENT
18
Power supply
The following power sources can be used to operate the OLP-88:
• Eight 1.5 V dry batteries
(Mignon AA size, alkaline type recommended)
• Eight 1.2 V NiMH rechargeable batteries
(Mignon AA size, no internal charge)
• PS4 Universal AC/DC Power Supply
• RBP2 LiIon Battery Pack
Battery operation
WARNING
Dangers when handling batteries
Handling batteries may be dangerous. Please note the
following safety instructions.
►
Please note the battery operation safety information in the
chapter
"Battery operation" on page
Replacing batteries
►
Do not replace individual batteries. Always change all eight
batteries at the same time.
►
Always use eight batteries of the same type; i.e. do not mix
rechargeable and non-rechargeable batteries.
Replacing batteries
Fig. 5
Replacing the batteries
1
RBP2 LiIon Battery Pack
2
Latch lock
3
AA battery tray
13.
OLP-88