Viavi OLP-88 User Manual page 29

OLP-88
Selecting the IP mode
1. Press the [A] key and tap the
2. Tap the [Ethernet]
3. Tap the [IP Mode]
4. Tap the Ethernet mode you want to select.
Setting the IP address
√ The IP mode Static is selected.
1. Press the [A] key and tap the
2. Tap the [Ethernet]
3. Tap the [IP Address]
4. Type in the desired IP address.
5. Tap the [OK] button.
Setting the gateway
√ The IP mode Static is selected.
1. Press the [A] key and tap the
2. Tap the [Ethernet]
3. Tap the [Gateway]
4. Type in the desired gateway.
5. Tap the [OK] button.
Setting the Wifi (optional)
1. Press the [A] key and tap the
2. Tap the [Wifi] button.
3. Press the [A] key and tap the desired setting.
Resetting to the factory default values
1. Press the [A] key and tap the
2. Tap the [Factory Reset]
Note: Setting the factory default values does not affect your
stored measurement results.
C
ONFIGURING THE INSTRUMENT
[Settings]
button.
button.
[Settings]
button.
button.
[Settings]
button.
button.
[Settings]
[Settings]
button.
4 B O
ASIC PERATION
button.
button.
button.
button.
button.
29