7
M
EMORY
OLP-88
M
ANAGEMENT
General information
The OLP-88 allows you to save measured values and inspection
images in a structured data memory and recall them as required.
Data can also be downloaded via the USB interface to a PC for
further evaluation.
In general there are two different modes available for data
saving:
Link Data Mode
In case of applying different measurements e.g. PCM inspection
and probe inspection on one test case, the saved results of all
application are assigned to a dedicated project and FiberID. So,
all measurements on one fiber performed with different
applications can be easily assigned by the reporting software
FiberChek PRO. The parameters for saving or reading data can
be set only globally from the homescreen menu for all
applications simultaneously.
Non Linked Mode
The result of a measurement application is saved under a free
selectable file name (default file name is the determined
incremental prefix) without any assignment to other
measurements. Projects for saving and reading data can be set
individually for each application.
To open the data menu:
√
The homescreen is displayed.
1.
Press the [A] key.
2.
Tap the
[Data]
button.
To view measurement data:
√
The data menu is displayed.
1.
Tap the [View
Data]
2.
Select an application to view all its saved data referring to the
selected project.
7 M
button.
M
EMORY
ANAGEMENT
G
ENERAL INFORMATION
47