Viavi OLP-88 User Manual page 45

OLP-88
Picture selected: Live
Test Allows you to launch a (new) test of the connector
(see "Launching a test of the connector and fiber
end-face" on page
Freeze Allows you to freeze the live image and to save it
later on the disk. Once this key is pressed, the freeze
image is automatically set to position 2.
Picture selected: Test
Save allows you to save the selected picture in the currently
selected group in the disk of the instrument. Press the [G] key,
enter a name for the JPG file, and validate.
Overlay allows you to display or hide the limits of each zone and
the defaults on an image from a test result.
Magnification Control allows you to switch all the images from
Digital Probe test results from high to low magnification and
vice-versa.
Saving the test result in a JPG file
Once the test has been performed and the result is displayed on
the OLP-88 screen:
1. Press the [G] key to save a JPG file of the test result in the
currently active group on the OLP-88.
2. On the edition keypad, enter the name of the JPG file.
3. Press Enter to validate and save the document.
The file is saved in the current active group directory on the
OLP-88.
Freeze mode
Once the image is acceptable (sharpness, luminosity are tuned
correctly), you may freeze the picture. This feature allows you to
store the resulting picture in order to compare it later to others
or save it in a file. In Freeze mode, the picture has a blue colored
frame.
Tip: Freezing a result does not store the picture in a file (see
"Saving a picture" on page
instrument is shut off.
Depending on the QuickCapture™ key setting, this key allows
you to freeze the picture or to start a test.
6 P /PCM O
ROBE
C
ONFIGURING THE
43)
42). The result will be lost if the
PERATION
D P
IGITAL ROBE
45