Table of Contents
Advertisement
Remote Control Port
Wifi
Factory Reset
OLP-88
Shows the TCP port used for remote control via Ethernet.
To configure the wireless local area networks.
Set the instrument parameters and settings to their default values as
defined by Viavi. This does not affect any stored measurement results.
Changing the Auto-Off setting
√
The instrument is switched on.
1.
Press the [A] key and tap the
2.
Tap the
[Auto-Off]
The power mode menu opens.
3.
Select the desired setting to change the power mode.
Changing the Screen-Off setting
1.
Press the [A] key and tap the
2.
Tap the
[Screen-Off]
3.
Select the desired setting to change the screen off time.
Note: Auto-Off and Screen-Off settings are only active when
no external power supply is connected.
Adjusting the display brightness
1.
Press the [A] key and tap the
2.
Tap the
[Brightness]
3.
Type in the desired brightness value.
4.
Tap the
[OK]
button.
Selecting a language
1.
Press the [A] key and tap the
2.
Tap the
[Language]
The language menu opens:
C
ONFIGURING THE INSTRUMENT
[Settings]
button.
[Settings]
button.
[Settings]
button.
[Settings]
button.
4 B
O
ASIC
PERATION
button.
button.
button.
button.
27
Hide quick links:
Advertisement
Table of Contents
