9 R
C
EMOTE
ONTROL
C
OMMANDS
Command string
:STOR:RD:IMG:LOW?
<STRING>,
<STRING>,
<STRING>
:STOR:RD:IMG:LOW
:OVRL?
<STRING>,
<STRING>,
<STRING>
:STOR:WR
<STRING>,
<STRING>
74
Parameter type / Response type / Unit / Info
Returns the contents of a *.lm.jpg ("lm.jpg" = "low magnification.jpg")
file specified by group (string1), fiber identifier (string2), and internal
identifier (string3).
Special format: "#h:14823,696e7072cdcc"
Returns the contents of a *.tlm.jpg ("tlm.jpg" = "test low
magnification.jpg") file specified by group (string1), fiber identifier
(string2), and internal identifier (string3).
Special format: "#h:16100,696e7072cdcc"
Writes a dedicated measurement result specified by group (string1)
and fiber identifier (string2). If the given group doesn't exist, it will be
created.
This command can take a few seconds to complete. Wait until
":STOR:WR:BUSY?" returns 0 before proceeding.
This command creates up to seven files for up to seven components of
the result. The seven ":STOR:RD...?" queries are used to read these result
files.
To create unique file names, this function automatically adds an internal
index.
Results, setups, and extended commands for the TruePON
application
►
Please visit the Viavi web site at
the latest operating manual (see also
update" on page
http://updatemyunit.net
8).
for
"Operating manual
OLP-88