2. Installation
6. Select the data to be carried over to the hard disk and not to be reset. To carry all of the data over
to the hard disk, select [All data].To carry over only the machine setting data, select [File System
Data Only]. To reset all of the data, select [Format All Data].
7. Press the [Start] Key.
8. The encryption key is printed.
Data Overwrite Security
1. Do the following procedure if a customer wants to use this function.
2. Do SP5-878-1(Option Setup - Data Overwrite Security) and touch [EXECUTE].
3. Go out of the SP mode, turn off the operation switch, then turn off the main power switch.
4. Turn the machine power on.
5. Press [User Tools] and select System Setting > Administrator Tools > Auto Erase Memory Setting >
On
6. Exit from User Tools mode.
7. Check the display and make sure that the overwrite erase icon [A] is displayed.
94