Ricoh Aficio MP C305SP Field Service Manual page 594

5. System Maintenance
1001 Bit Switch
bit 3
bit 4
1001 Bit Switch
009 Bit Switch 9
bit 5
bit 6
bit 7
592
DFU
Timing of the PJL Status ReadBack (JOB END) when
printing multiple collated copies.
This bit switch determines the timing of the PJL USTATUS JOB END sent when
multiple collated copies are being printed.
Disable (=0 (default)):
JOB END is sent by the device to the client after the first copy has completed
printing. This causes the page counter to be incremented after the first copy and then
again at the end of the job.
Enable (=1):
JOB END is sent by the device to the client after the last copy has finished printing.
This causes the page counter to be incremented at the end of each job.
Display UTF-8 text in the operation panel
Enable (=0):
Text composed of UTF-8 characters can be displayed in the operation panel.
Disable (=1):
UTF-8 characters cannot be displayed in the operation panel.
For example, job names are sometimes stored in the MIB using UTF-8 encoded
characters. When these are displayed on the operation panel, they will be garbled
unless this bit switch is enabled (=0).
DFU
Enable/Disable Print from USB/SD's Preview
function
Determines whether print from USB/SD will have the Preview function.
Enabled (=0): Print from USB/SD will have the Preview function.
Disabled (=1): Print from USB/SD will not have the Preview function.
- -
0: Disable 1: Enable
0 1
0: Enable 1: Disable
- -
0: Enable 1: Disable