Ricoh Aficio MP C305SP Field Service Manual page 355

002 Shading Correction Flag
2109 [Pattern Selection]
Pattern Selection
Selects the test pattern.
0 None
1: Vertical Line (1dot)
2: Vertical Line (2dot)
3: Horizontal (1dot)
003
4: Horizontal (2dot)
5: Grid Vertical Line
6: Grid Horizontal Line
7: Grid pattern Small
8: Grid pattern Large
9: Argyle Pattern Small
10: Argyle Pattern Large
005 Color Selection
006 Density:Bk
007 Density:Ma
008 Density:Cy
009 Density:Ye
2111 [Forced Line Position Adj.]
001 Mode a
*ENG [0 or 1 / 1 / 1/step]
*ENG [0 to 23 / 0 / 1/step]
11. Independent Pattern (1dot)
12. Independent Pattern (2dot)
13. Independent Pattern (4dot)
14. Trimming Area
16: Hound's Tooth Check (Horizontal)
17: Band (Horizontal)
18: Band (Vertical)
19: Checker Flag Pattern
20: Grayscale Vertical Margin
21: Grayscale Horizontal Margin
23: Full Dot Pattern
Specifies the color for the test pattern.
*ENG [1 to 4 / 1 / 1/step]
1:All Color, 2:Ma, 3:Ye, 4:Bk
*ENG
Specifies the color density for the test
pattern.
*ENG
[0 to 15 / 15 / 1/step]
*ENG
0: Lightest density
15: Darkest density
*ENG
[Execute]
Executes the fine line position adjustment
twice.
ENG
If this SP is not completed (NG is
displayed), do SP2111-003 first and then
try this SP again.
Main SP Tables-2
353