Debug Log Codes; Sp5857-015 Copy Sd Card-To-Sd Card: Any Desired Key; Sp5857-016 Create A File On Hdd To Store A Log; Sp5857-017 Create A File On Sd Card To Store A Log - Ricoh Aficio MP C305SP Field Service Manual

Gr-c1, machine codes: d117/d118

Hide thumbs Also See for Aficio MP C305SP:

Table of Contents

Using the Debug Log

Debug Log Codes

This SP copies the log on an SD card (the file that contains the information written directly from shared

memory) to a log specified by key number. The copy operation is executed in the log directory of the SD

card inserted in the same slot. (This function does not copy from one slot to another.) Each SD card can

hold up to 4 MB of file data. Unique file names are created for the data during the copy operation to

prevent overwriting files of the same name. This means that log data from more than one machine can

be copied onto the same SD card. This command does not execute if there is no log on the HDD for the

name of the specified key.

This SP creates a 32 MB file to store a log on the HDD. However, this is not a completely empty file. The

created file will hold the number "2225" as the SCS key number and other non-volatile information.

Even if this SP is not executed, a file is created on the HDD when the first log is stored on the HDD (it

takes some time to complete this operation). This creates the possibility that the machine may be

switched off and on before the log can be created completely. If you execute this SP to create the log

file beforehand, this will greatly reduce the amount of time required to acquire the log information and

save onto the HDD. With the file already created on the HDD for the log file, the data only needs to be

recorded. A new log file does not need to be created. To create a new log file, do SP5857-011 to

delete the debug log data from the HDD. Then do SP5857-016.

This SP creates a 4 MB file to store a log on an SD card. However, this is not a completely empty file.

The created file will hold the number "2225" as the SCS key number and other non-volatile information.

Even if this SP is not executed, a file is created on the SD card when the first log is stored on the SD card

(it takes some time to complete this operation). This creates the possibility that the machine may be

switched off and on before the log can be created completely. If you execute this SP to create the log

file beforehand, this will greatly reduce the amount of time required to acquire the log information and

save onto the SD card. With the file already created on the SD card for the log file, the data only needs

to be recorded; a new log file does not require creation. To create a new log file, do SP5857-012 to

delete the debug log data from the SD card. Then do SP5857-017.

Table of Contents