Documentation; Connecting The Printer Or Pc; Output Of Measured Values - wtw Turb 555 Operating Manual

Turb 555 / Turb 555 IR
ba41113e07 04/2009
4.6

Documentation

When the instrument is connected to a printer or PC as an
output device, you can record measured values. Information
on suitable cables or the printer can be found in chapter 8
A , O
CCESSORIES PTIONS

4.6.1 Connecting the printer or PC

1 Connect the printer/PC cable to the RS232 interface
(1) of the instrument.
2 Connect the printer/PC cable to the printer/PC.

4.6.2 Output of measured values

Depending on whether the periodical measured value out-
put is switched on or off, you have two possibilities to trans-
mit measured values to a printer or PC via the RS232
interface:
Periodical measured value output switched off:
By pressing the
output together with the date and time.
Periodical measured value output switched on:
The measured values are automatically output at regular
intervals. The output interval can be set.
.
1
key, the current measured value is
Operation
59