Authorized Use; General Safety Instructions - wtw inoLab Oxi Level 2 Operating Manual

Safety
Function and
operational safety
80
2.1

Authorized use

This instrument is authorized exclusively for measuring the
dissolved oxygen in liquid samples in the laboratory.
The technical specifications as given in the chapter 7
T , must be observed. Only the operation and
ECHNICAL DATA
running of the measuring instrument according to the
instructions given in this operating manual is authorized.
Any other use is considered unauthorized.
2.2

General safety instructions

This instrument is constructed and tested in compliance with
the EN 61010-1 safety regulations for electronic measuring
instruments. It left the factory in a safe and secure technical
condition.
The smooth functioning and operational safety of the
instrument can only be guaranteed if the generally
applicable safety measures and the specific safety
instructions in this operating manual are followed.
The smooth functioning and operational safety of the
instrument can only be guaranteed under the climatic
conditions specified in chapter 7 T
If the instrument was transported from a cold environment to
a warm environment, the formation of condensate can lead
to the faulty functioning of the instrument. In this event, wait
until the temperature of the instrument reaches room
temperature before putting the instrument back into
operation.
Caution
The instrument is only allowed to be opened by personnel
authorized by WTW.
.
ECHNICAL DATA