wtw inoLab Oxi Level 2 Operating Manual page 57

Instrument does not
react to keystroke
You would like to
know which soft-
ware version is in
the instrument
Integrated printer
does not print
Integrated printer
prints automatically
Cause
– Operating state
undefined or EMC
electric stress unallowed
Cause
– e.g. question of the WTW
service department
Cause
– Printer switched off
– No mains power supply
connected
– Interface cable
connected
– No paper available
– AutoStore function is
switched on with a longer
interval duration (Int 1)
Cause
– AutoStore function
(Int 1) or Data
transmission (Int 2) is
switched on
What to do if...
Remedy
– Processor reset:
a
Press the key and
switch on instrument
Remedy
a
– Press the
switch on instrument.
The software version
is displayed.
Remedy
– Switch on printer
– Connect mains power
supply
– Unplug cable
– Replace roll of paper
– Switch off AutoStore
function
Remedy
– Switch off functions
key and
127