wtw inoLab Oxi Level 2 Operating Manual page 34

Operation
104
5 As soon as all 800 memory locations are full, the
AutoStore function is terminated (Int 1 = OFF).
If too few storage locations are available for your
measurements:
– backup the data storage (see page 105) and
– clear the data stored (see page 109).
g
6 Confirm with
The prompt for the I.D. number appears on the
display.
u d
7 Press to set the required I.D. number.
g
8 Confirm with
The instrument changes to the measuring mode and
starts the measuring and storage procedure.
AutoStore flashes on the display.
.
.