Configuration - wtw inoLab Oxi Level 2 Operating Manual

4.6

Configuration

You can adapt the dissolved oxygen meter to your individual
requirements. To do this, the following parameters can be
changed (the status on delivery is marked in bold):
Baud rate
Data transmission inter-
val (Int 2)
Calibration interval (Int 3) 1 ... 14 ... 999 d
Air pressure display
AutoRange ARng
Temperature unit
Date/time
Note
You can leave the configuration menu at any time.
Parameters that have already been changed are stored.
To do this, press the
1 Switch off the instrument.
2 Press and hold down the
e
3 Press the
The display test appears briefly on the display.
The instrument then switches automatically to the
setting of the baud rate.
1200, 2400, 4800, 9600
OFF, 5 s, 10 s, 30 s, 1 min,
5 min, 10 min, 15 min, 30 min,
60 min
Current value in mbar
(no input possible)
yes, no
°C, °F
As required
m
key.
m
key.
key.
Operation
115