wtw inoLab Oxi Level 2 Operating Manual page 49

Measuring
parameters
Configuration
parameters
4.7 Reset
You can reset (initialize) measuring and configuration
parameters separately from one another.
The following measuring parameters (Oxi InI) are reset to
the values they had on delivery:
Measuring mode
AutoRange
Relative slope
Salinity (value)
Salinity (function)
Note
When the measuring parameters are reset, the calibration
data are lost. After the parameters have been reset,
calibrate!
The following configuration parameters (InI) are reset to the
values they had on delivery:
Baud rate
Interval 1
(automatic storing)
Interval 2
(for data transmission)
Oxygen concentration
yes
1.00
0.0
OFF
4800
OFF
OFF
Operation
119