wtw inoLab Oxi Level 2 Operating Manual page 65

Lists
Glossary
AutoRange Automatic measuring range selection
AutoRead Supervises the probe drift and releases the measured value
only after the stability criterion has been reached. Thus, the
highest precision and reproducibility is achieved.
Baud rate Transmission speed in bits/s
®
OxiCal Automatic calibration
Oxygen saturation Relation of the pO in the test sample to the pO of air at the
2 2
current air pressure. Example: 100% means that the test
sample and the ambient air have the same pO air and test
2 –
sample are balanced. According to DIN EN 25814, the
oxygen saturation was also referred to as air saturation up
to now.
Oxygen partial pO in mbar, i.e. the gas pressure that would prevail if only
2
pressure O was available.
2
Relative slope Dimensionless factor, referring to the average slope value of
newly regenerated probes of the same type.
Salinity Salt content of a solution (without dimension), given in
‰
.
135