Sargent IN220 Installation Instructions Manual page 15

C. Through-Bolt and Door Thickness Adjustment
1. (If necessary) remove outside lever, scalp and spacer
bushing (Fig. 6C).
2. Rotate mounting plate to either align with through-bolt holes in
door, or adjust for proper door thickness (Fig. 6D).
Refer to markings on through-bolt post (Fig. 6C Detail).
3. Re-install spacer bushing to align with back
of lever, scalp, and lever (Fig. 6D).
15 1-800-810-WIRE • www.sargentlock.com • A8203A
Outside Lever
1-3/4" Thick Doors
2" Thick Doors
Fig. 6C Detail
Spacer Bushing
Scalp
Fig. 6D
IN220 Cylindrical Lock
Fig. 6C