Sargent IN220 Installation Instructions Manual page 14

6 Through-Bolt and Door Thickness Adjustment (If Required)
A. Remove Outside Lever
1. Insert key, rotate 45° clockwise and hold.
2. Depress lever retainer with push pin tool (provided).
3. Pull lever outward.
B. How To Change Cylinder (If Necessary)
1. With outside lever in hand, use standard pliers
to pull out cylinder retainer.
2. Remove key and cylinder from lever.
3. Insert new cylinder.
4. Secure by pressing cylinder retainer flush with the lever.
14 1-800-810-WIRE • www.sargentlock.com • A8203A
Outside of Door
Cylinder
Retainer
Cylinder
Spacer
Washers required for
30- prefix (10 Line Lever)
to accept Schlage cylinder
(no cylinder provided)
IN220 Cylindrical Lock
Fig. 6A
Cylinder
Fig. 6B
Key
Outside
Lever
Push Pin Tool