Sargent IN220 Installation Instructions Manual page 13

IN220 Cylindrical Lock
5 Lock Adjustments
A. Lock Preset:
• Lock body holes: 12 and 6 o'clock (Fig. 5).
The lock is shipped "preset" and does not require adjustment for 1-3/4" thick doors.
Outside of Door
Door thickness:
1-3/4" thick
Fig. 5
NOTE: Adjusting for a thicker door requires removal of the outside lever, scalp and
spacer bushing; see following sections.
If preset lock does not require adjustment, proceed to Step 7 - Install Lock
13 1-800-810-WIRE • www.sargentlock.com • A8203A