Table of Contents
Advertisement
FX-10DM-E DISPLAY MODULE
1.8.2
How to look at device indication
Among word devices, data registers (D), timers (T) and counters (C) can be displayed in the
10DM. Data is displayed in decimal numbers.
Such word devices can be displayed using the "device monitor" and "entry monitor" functions.
Display example:
The example below shows display of each device using the "device monitor" function.
The "entry monitor" function can display the device name as comment.
Up to two data registers can be displayed. Only one timer or counter can be displayed because
both the current value and the set value are displayed for each timer or counter.
*1 The 10DM displays actually "
data register. In this manual, a 16-bit type data register is described as "D" and a 32-bit type
data register as "DD".
" for a 16-bit type data register and "
Introduction 1
" for a 32-bit type
1-12
Advertisement
Table of Contents
