Mitsubishi MELSEC-F FX-10DM-E User Manual page 62

FX-10DM-E DISPLAY MODULE Display Function 6
A message of up to 16 characters can be displayed.
The comment (in ASCII codes) stored in the data register No. written in the preset word
device is displayed.
By writing to D30 the data register No. corresponding to the message to be displayed, you
can change over the displayed message.
If "K-1" is written, nothing is displayed (blank display).
Program the device No. storing the message and the ASCII codes for the message in the
sequence program.
5) MONITOR+MES. Target devices: D and DD
The device and the data are displayed, then the displayed contents can be changed over to
a message.
If D31 stores "K-1", the device name and the data are displayed (in the same way as "1:
MONITOR" above).
Program the device No. to be displayed and the ASCII codes for the message in the
sequence program.
6-8