Table of Contents
Advertisement
FX-10DM-E DISPLAY MODULE
5) Fixing the 10DM
A) Insert the hook of each bracket (offered as acces-
sory) into the mounting hook hole of the 10DM, and
pull the hook toward you.
B) Slide leftward each bracket, and fix it.
C) Tighten the screw until it is fixed with the tightening
bolt (offered as accessory).
Fix the 10DM at four points (2 points at the top, and 2
points at the bottom).
a) Bracket with tightening bolt
* Make sure that the tightening torque for the tight-
ening bolt is 0.18 to 0.22 N"m.
Installation, Wiring and Maintenance 3
a)
C)
3-3
1.Introduction
2.Specifica-
A)
tions
3.Installation
Wiring
B)
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
Advertisement
Table of Contents
