Advertisement
Quick Links
Advertisement
Related Manuals for Mitsubishi FX-10P-E
Summary of Contents for Mitsubishi FX-10P-E
- Page 1 OPERATION MANUAL FX-10P-E...
- Page 2 This manual explains the programming and monitoring procedures of the micro PC MELSEC-FX series using the FX-10P-E handy programming panel. Read this manual carefully and thoroughly and make sure the specifications for handy programming panel are correct. See the corresponding FX series PC manual for details about PC handing and instructions.
-
Page 3: Programming Panel
FX-10P-E Handy programming panel FX-10P-E Handy programming panel Guidelines for the Safety of the User and Protection of the FX-10P-E HANDY PROGRAMMING PANEL. This manual provides information for the use of the FX-10P-E HANDY PROGRAMMING PANEL. The manual has been written to be used by trained and competent personnel. The... - Page 4 FX-10P-E Handy programming panel Note’s on the Symbols Used in this Manual At various times through out this manual certain symbols will be used to highlight points which are intended to ensure the users personal safety and protect the integrity of equipment.
- Page 5 FX-10P-E Handy programming panel • Under no circumstances will Mitsubishi Electric be liable responsible for any consequential damage that may arise as a result of the installation or use of this equipment. • All examples and diagrams shown in this manual are intended only as an aid to understanding the text, not to guarantee operation.
-
Page 6: Caution On Operation
FX-10P-E Handy programming panel Caution on operation Thoroughly read the manual and sufficiently assure safety before executing the operation to forcibly set devices to ON/OFF or the operation to change present values and set values of word devices in the test mode. -
Page 7: New Features
The FX-10P-E (ver 4.10 or later) fully supports all items and procedures used for the FX , FX and FX PLCs. Read section 1-3 in addition to the contents of the text when using the FX-10P-E (ver 4.10 or later). New Features Table 1.1... -
Page 8: For Details Of Each Instruction And Devices, Refer To The Fx Programming Manual
List of Additional Devices and Instructions • For details of each instruction and devices, refer to the FX programming manual. Table 2.1 Table 2.2 Devices Basic Instructions Auxiliary relays M0 to M3071 3072 points Data registers D0 to D7999 8000 points Index registers V0 to V7, Z0 to Z7 16 points... - Page 9 New Operations for FX , FX , FX , FX Support Basic and Applied instructions are added Symbol and input operation of additional basic instructions Table 3.1 Instruction Description Mnemonic Key Operations Initial leading edge pulse contact Device Number Initial trailing edge pulse contact Device Number Serial connection leading edge ANDP...
- Page 10 Applied instruction input operation ..Applied Instruction No. Operand 1 Operand 2 The number of operands vary depending on the instruction. • It is the responsibility of the operator to ensure that the instruction entered is valid for the current unit. Application instruction input operation (by using the HELP function) 0 PROGRAM FLOW 10 CMP...
- Page 11 Expansion of Device Range • For a list of the new device ranges see section 2. Handling index registers “V0” and “Z0” index registers are equivalent to registers “V” and “Z” respectively, so either one can be used for programming. When entering “V1”...
- Page 12 Others Device conversion Device number conversion is not possible between the following devices because the number of program steps required is different. - M0 to M1535 ↔ M1536 to M3071 (FX and FX only) - 16-bit counter ↔ 32-bit counter (all FX models) Writing the program to the FX-EEPROM-16 •...
- Page 126 OPERATION MANUAL FX-10P-E HEAD OFFICE: MITSUBISHI DENKI BLDG MARUNOUCHI TOKYO 100-8310 HIMEJI WORKS: 840, CHIYODA CHO, HIMEJI, JAPAN FX-10P-O-E MODEL 09R913 MODEL CODE JY992D33401B Effective Mar. 2003 (SEN) Specifications are subject to change without notice.