Table of Contents
Advertisement
FX-10DM-E DISPLAY MODULE
1.8
Key functions and how to look at device indication
1.8.1
Key functions
The 10DM allows to select and display word devices and change the data using the five keys.
Some combinations of the keys offer special functions.
Table 1.3:
Key
*1
operation
[FNC]+[ENT]
[FNC]
[ENT]
[L]
[M]
When a line is selected
Changes over the screen to "SYSTEM MODE".
(This function can be prohibited by "OTHER"-"CALL SYSTEM".)
Changes over the mode to the line selec-
tion mode when pressed and held for 1
sec or more.
Determines the input (and changes over
the mode from the line selection mode to
the device selection mode).
Moves up the function display on the
"SYSTEM MODE" menu or shifts upward
the display line of "ENTRY MONITOR".
Moves down the function display on the
"SYSTEM MODE" menu or shifts down-
ward the display line of "ENTRY MONI-
TOR".
When a device (numeric value) is
selected
Allows to specify a digit by the numeric
value of the device.
Determines the device or completes the
input of numeric value.
Changes over the device (D→D-
D→T→C→) and increases a numeric
value. Changes the sign of the data from
minus (-) to plus (+).
Changes over the device (D→C→
T→DD→) and decreases a numeric value.
Changes the sign of the data from plus (+)
to minus (-).
Introduction 1
1-10
Advertisement
Table of Contents
