Table of Contents
Advertisement
FX-10DM-E DISPLAY MODULE
1.3
Introduction of functions
This paragraph introduces the display function and other functions of the 10DM.
1.3.1
Display function
The 10DM offers the following two types of displays.
1) Entry monitor display (Refer to Paragraph 6.2.)
a) Messages, comments and word devices (D, T, C) can be displayed.
•
In the message display, you can change the number of displayed characters from the PLC.
•
In the comment display, comments in Katakana characters stored in a program in the PLC are
displayed.
•
Up to 8 items can be displayed, and scrolled with the [L] and [M] keys.
b) You can change the data with simple key operations.
2) Device monitor display (Refer to Paragraph 6.4.)
a) Word devices (D, T, C) can be displayed in up to 2 lines.
b) You can change the data with simple key operations.
Introduction 1
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
1-3
Advertisement
Table of Contents
