Safe Operation; Authorized Use; Requirements For Safe Operation; Unauthorized Use - wtw Cond 7310 Operating Manual

Cond 7310
ba75933e04 06/2013
2.2

Safe operation

2.2.1 Authorized use

This meter is authorized exclusively for conductivity measurements in the labo-
ratory.
Only the operation and running of the meter according to the instructions and
technical specifications given in this operating manual is authorized (see
section 12 T
ECHNICAL DATA
Any other use is considered unauthorized.

2.2.2 Requirements for safe operation

Note the following points for safe operation:
• The meter may only be operated according to the authorized use specified
above.
• The meter may only be supplied with power by the energy sources
mentioned in this operating manual.
• The meter may only be operated under the environmental conditions
mentioned in this operating manual.
• The meter may only be opened if this is explicitly described in this operating
manual (example: Inserting the batteries).

2.2.3 Unauthorized use

The meter must not be put into operation if:
• it is visibly damaged (e.g. after being transported)
• it was stored under adverse conditions for a lengthy period of time (storing
conditions, see section 12 T
, page 50).
, page 50).
ECHNICAL DATA
Safety instructions
9