Operation; General Operating Principles; Keypad - wtw Cond 7310 Operating Manual

Cond 7310
STO STO
RCL
AR AR
ba75933e04 06/2013
4

Operation

4.1

General operating principles

4.1.1 Keypad

In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g. <ENTER_>).
<F1>:
F1
<F1_>:
<F2>:
F2 <F2__>:
<On/Off>:
<M>:
<CAL>:
<CAL_>:
<STO>:
<STO_>:
<RCL>:
<RCL_>:
<><>:
<_><_>:
<ENTER>:
<ENTER_>:
<AR>
Softkeys providing situation dependent functions, e.g.:
<F1>/[Menu]: Opens the menu for measurement settings
<F1_>/[Menu]: Opens the menu for system settings
Switches the meter on or off
Selects the measured parameter / Quits the settings
Calls up the calibration procedure
Displays the calibration data
Saves a measured value manually
Opens the menu for the automatic save function
Displays the manually stored measured values
Displays the automatically stored measured values
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
Operation
13