wtw Cond 7310 Operating Manual page 37

Cond 7310
Settings
Starting the auto-
matic storage func-
tion
Energy saving mode
[Eco mode]
ba75933e04 06/2013
You can configure the automatic storage function with the following settings:
Menu item
ID number
Interval
Duration
To start the automatic storage function, select Continue with <><> and
confirm with <ENTER>. The meter switches to the measured value display.
ϰ
1422
25.0
[Tr25][nLF][ 0.479 1/cm]
0d03h00min
01.07.2011
Eco mode
08:00
1 Remaining storage duration
2 Graphical display of the storage duration
The active automatic storage function can be recognized by the progress bar
in the status line. The progress bar indicates the remaining storage duration.
If the automatic storage function is activated, only the following
keys are active: Softkeys, <M>, <STO_> and <On/Off>.
The other keys and the automatic switch-off function are deacti-
vated.
If the automatic storing function is active, the meter provides an energy saving
mode [Eco mode] to avoid unnecessary energy consumption. The energy
Possible set- Description
ting
1 ... 10000 ID number for the dataset series.
1 s, 5 s, 10 s, Storage interval.
30 s, 1 min,
5 min, The lower limit of the storage
10 min, interval can be restricted by the
15 min, number of free storage locations.
30 min, The upper limit is restricted by the
60 min storage duration.
1 min ... x min Storage duration.
Specifies after which time the
automatic storage should be ter-
minated.
The lower limit of the storage
duration is restricted by the stor-
age interval.
The upper limit is restricted by the
number of free storage locations.
µS/cm
°C
USB output
Data storage
1
2
37