What To Do If - wtw Cond 7310 Operating Manual

Cond 7310
Integrated printer
does not print
Printer operating -
paper not being
printed
Integrated printer
prints automatically
ba75933e04 06/2013
Use original WTW rolls of paper only. You will find information on
this in the WTW catalog L
the Internet.
The thermal paper will remain legible for at least 7 years if stored
appropriately.
9.5 What to do if... / printer
Cause
– Printer switched off
(LED flashing)
– No power pack connected
– USB cable connected
– Function "automatic storing at
intervals" with long intervals is
switched on
– No paper available
Cause
– Paper inserted the wrong way up
Cause
– The function "Automatic storage
at intervals" or "Transmit data
automatic at intervals" is
switched on
Printer (only Cond 7310 P)
F
ABORATORY AND IELD
Remedy
– Switch on the printer
(LED illuminated)
– Connect the power pack
– Disconnect the USB cable from the
meter
– Switch off the function (see section
7.2 A
UTOMATIC DATA STORAGE AT
, page 36)
INTERVALS
– Insert a roll of paper
Remedy
– Turn the roll of paper around and
insert it with the other side upwards
Remedy
– Switch off the function (see section
7.2 A
UTOMATIC DATA STORAGE AT
, page 36 or
INTERVALS
section 8.1 O
PTIONS FOR DATA
, page 41)
TRANSMISSION
I or on
NFORMATION
45