wtw Cond 7310 Operating Manual page 26

Conductivity
Displaying the cali-
bration data storage
Calibration evalua-
tion
26
Subsequently, you can transmit the displayed calibration data to the interface,
e. g. to a PC, with <F2>[USB output].
The calibration records of the last calibrations (up to 10) are available in the
menu, <F1>/[Menu] / Calibration / Calibration data storage and in the menu,
<F1_>/[Menu] / Storage & config/Data storage / Calibration data storage.
Menu item
Calibration /
Calibration data stor-
age /Display
or
Data storage /
Calibration data stor-
age /Display
Calibration /
Calibration data stor-
age /
Output to USB
or
Data storage /
Calibration data stor-
age /Output to USB
After the calibration, the meter automatically evaluates the current status of the
calibration. The evaluation appears on the display and in the calibration record.
Display Calibration
record
+++
Error Error
Error elimination (see section 11
W ..., page 48)
HAT TO DO IF
Setting/func- Description
tion
- Displays the calibration record.
Further options:
 Scroll through the calibration
records with <><>.
 Output the displayed calibra-
tion record to the interface with
<F2>/[USB output].
 Quit the display with
<F1>/[Back] or <ENTER>.
 Switch directly to the mea-
sured value display with <M>.
- Outputs the calibration records to
the interface.
Cell constant [cm
within the ranges
0.450 ... 0.500 cm
or
0.800 ... 0.880 cm
outside the ranges
0.450 ... 0.500 cm
or
0.800 ... 0.880 cm
Cond 7310
-1
]
-1
-1
-1
-1
ba75933e04 06/2013