Resetting The System Settings - wtw Cond 7310 Operating Manual

Settings
34
Setting
Reference temperature
Temperature coefficient (TC) of the
linear temperature compensation
TDS factor
Stability control
Temperature unit
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open it, press the <F1>/[Menu] or
<ENTER> key in the measured value display.

6.3.2 Resetting the system settings

The following system settings can be reset to the default condition:
Setting
Language
Beep
Baud rate
Output format
Contrast
Illumination
Switchoff time
The system settings are reset in the menu, Storage & config / System / Reset.
To open the Storage & config menu, press the <F1_>[Menu] key in the
measured value display.
Default settings
25 °C
2.000 %/K
1,00
On
°C
Default settings
English
On
4800 Baud
ASCII
50 %
On
1 h
Cond 7310
ba75933e04 06/2013