Commissioning
10
3
Commissioning
3.1
Scope of delivery
Conductivity meter Cond 7310
4 batteries 1.5 V Mignon type AA
Power pack
USB cable
Stand
Stand holder
Comprehensive operating manual
Short instructions
CD-ROM with
– USB drivers
– comprehensive operating manual
– software MultiLab Importer
3.2
Power supply
The Cond 7310 is supplied with power in the following ways:
Mains operation with the supplied power pack.
Battery operation (4 x alkaline manganese batteries, type AA)
USB operation via a connected USB-B cable.
3.3
Initial commissioning
Perform the following activities:
Insert the supplied batteries
For mains operation: Connect the power pack
If necessary, mount the stand
Switch on the meter (see section 4.2 S
Set the date and time (see section 4.4.5 E
THE DATE AND TIME
WITCHING ON THE METER
, page 20)
2
XAMPLE
ON NAVIGATION
ba75933e04
Cond 7310
, page 15)
: S
ETTING
06/2013