Example 2 On Navigation: Setting The Date And Time - wtw Cond 7310 Operating Manual

Operation
20
General
Language:
Beep:
Illumination:
Contrast:
Switchoff time:
01.07.2011
Back
7. Open the setting mode for the Language with <ENTER>.
General
Language:
Beep:
Illumination:
Contrast:
Switchoff time:
01.07.2011
Back
8. Select the required language with <><>.
9. Confirm the setting with <ENTER>.
The meter switches to the measuring mode.
The selected language is active.

4.4.5 Example 2 on navigation: Setting the date and time

The measuring instrument has a clock with a date function. The date and time
are indicated in the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
 Current date and time
 Calibration date
 Identification of stored measured values.
Therefore, check the time at regular intervals.
After a fall of the supply voltage (empty batteries), the date and time
are reset to 01.01.2011 00, 00:00 hours.
Deutsch
Off
On
48 %
30 min
08:00
Deutsch
Off
On
48 %
30 min
08:00
Cond 7310
ba75933e04 06/2013