COPPER BRUTE II (500 - 2000) INSTALLATION AND OPERATING INSTRUCTIONS
10.B
If the gas supply pressure is proper and the gas
valves are functioning properly, then burners should
perforations in the burners outside of the active burner
10.C Short Cycling — Boiler
and its input will decrease when there is a reduction
the heating load drops below the minimum input of
10.D Short Cycling — Water Heater
combination space heating and water heating
applications when the water heater is operating in the
there is a reduction in heating load, short cycling is
period, the water heater will have a tendency to short
regardless of the control's attempt to limit it, the
If short cycling occurs in a water heater
application, it is probably caused by undersized
piping between the water heater and the storage tank
or by some other factor that restricts proper water
10.E
) is available then a proper
strong piercing smell indicates poor combustion and
, and adjust the air shutters if further adjustment
Page 79
is low), appliances
) cannot be
is