Bradford White Copper Brute II Installation And Operation Instructions For page 51

COPPER BRUTE II (500 - 2000) INSTALLATION AND OPERATING INSTRUCTIONS
6.E.3 DHW/DHW3
Screen 21.
adjustment:
• DHW Offset
6.E.4 Outdoor Reset
and since this functionality is not mandatory, it can be
parameters are:
When there is an active outdoor reset condition, the
demand set point to the low point of the outdoor reset
heat demand is active and the programmed set point
Screen 22.
adjustment of the following parameters:
• Enable/Disable
• Maximum Ambient Temperature
temperature at which the Copper Brute ll will limit
the boiler outlet temperature to the Minimum Water
• Minimum Ambient Temperature
outdoor temperature at which the Copper Brute ll
• Maximum Water Temperature
boiler outlet temperature based on the Minimum
• Minimum Water Temperature
Page 51