Page 54
Demand Priority – This parameter sets the heat
Off Hysteresis – The temperature above the
On Hysteresis – The temperature below the
Max Lag Temp –
hand section of the home screen, and the set point will
below, and set the Address to any number from 1 to
Screen 26. Lag On, Lag Off Hysteresis
functionality:
Lag On Hysteresis –
cascade demand, based on their local outlet water
Lag Off Hysteresis –
active cascade demand, based on their local outlet
The C-CH is the set point of the Cascade CH
heat demand from the lead boiler is indicated by the
cascade icon shown in the lower right hand portion
B
W
C
RADFORD
HITE
ORP.