Bradford White Copper Brute II Installation And Operation Instructions For page 14

Page 14
At the time of installation of the side wall
horizontal vented gas fueled equipment, the
shall observe that a battery operated or hard-
installed on each additional level of the dwelling,
building or structure served by the side wall
the responsibility of the property owner to secure
gas fueled equipment is installed in a crawl space
detector with alarm and battery back-up may be
subdivision cannot be met at the time of
completion of installation, the owner shall have a
accordance with the above provisions shall comply
building at a minimum height of eight (8) feet
terminal for the horizontally vented gas fueled
read, in print size no less than one-half (½) inch
The state or local gas inspector of the side wall
horizontally vented gas fueled equipment shall not
approve the installation unless, upon inspection,
and signage installed in accordance with the
fueled equipment installed in a room or structure
separate from the dwelling, building or structure
(c) MANUFACTURER REQUIREMENTS –
GAS EQUIPMENT VENTING SYSTEM
PROVIDED. When the manufacturer of
Product Approved side wall horizontally
vented gas equipment provides a venting
system design or venting system components
with the equipment, the instructions provided
by the manufacturer for installation of the
equipment and the venting system shall
venting system design or the venting system
(d) MANUFACTURER REQUIREMENTS – GAS
EQUIPMENT VENTING SYSTEM NOT
PROVIDED. When the manufacturer of a
Product Approved side wall horizontally vented
gas fueled equipment does not provide the parts
venting systems", the following requirements
instructions shall be included with the appliance or
Approved by the Board, and the instructions for
that system shall include a parts list and detailed
(e) A copy of all installation instructions for all
Product Approved side wall horizontally vented
gas fueled equipment, all venting instructions,
all parts lists for venting instructions, and/or all
venting design instructions shall remain with the
appliance or equipment at the completion of the
installation.
B W C
RADFORD HITE ORP.