Bradford White Copper Brute II Installation And Operation Instructions For page 64

Page 64
Screen 39.
adjustment of the following parameters:
• Temp Min – Upon an active warm weather
shutdown condition, this is the temperature at which
the Copper Brute ll will reset the shutdown condition
• Temp Max – This is the temperature at which the
• Feature Options – This parameter provides the
ability to either disable warm weather shutdown or
Brute ll to shut down immediately or to shut down
• Summer Kick CH – This is the amount of time
the Copper Brute ll pump is energized if it hasn't
• Summer Kick DHW – This is the amount of
• Summer Kick SYS – This is the amount of time
• Summer Kick Period – The duration of time
between heat demands that the boiler will wait before
6.E.11.e
Screen 40.
adjustment of the following parameters:
• Protocol – Allows selection of either Modbus or
With Modbus protocol selected, the following
parameters are adjustable on this screen:
• Baudrate –
• Address – The address of the Copper Brute ll on the
• Timeout – Upon loss of communication, this is the
duration of time in which the Copper Brute ll will
Screen 41.
With BACnet protocol selected, the following
parameters are adjustable on this screen:
• Baudrate –
• Address – The address of the Copper Brute ll on the
• Device Model Name – The name of the Copper
• Device Object Name – The name of the Copper
• Object Instance – The object number of the Copper
• Timeout – Upon loss of communication, this is the
duration of time in which the Copper Brute ll will
B W C
RADFORD HITE ORP.