Bradford White Copper Brute II Installation And Operation Instructions For page 55

COPPER BRUTE II (500 - 2000) INSTALLATION AND OPERATING INSTRUCTIONS
Screen 27. Home Screen of a Lag Boiler
6.E.5.c Cascade CH
An installation with two or more Copper Brute lls
Screen 28.
adjustment of the following parameters:
• Address
is available to use, refer to this parameter below for
• Dynamic Address
• Lead Settings
• Lost Lead Backup Set Point
• Lag On Hysteresis
• Lag Off Hysteresis
• Cascade Release Demand - When
communications with the master is lost and the lag
units continue to satisfy the cascade heat demand,
Page 55