Bradford White Copper Brute II Installation And Operation Instructions For page 65

COPPER BRUTE II (500 - 2000) INSTALLATION AND OPERATING INSTRUCTIONS
6.E.11.f
To navigate to the Temperature Conversion
Temperature Conversion Icon on the Miscellaneous
Screen 42.
allows adjustment of the following parameter:
• Conversion Unit – This parameter can be
6.E.11.g
Screen 43.
adjustment of the following parameters:
• Anti-Frost – This parameter provides the ability
to either disable anti-frost or upon an anti-frost
• Set Point – The temperature at which the Copper
Brute ll will apply the Hysteresis value to enable the
• Hysteresis –
• Pump Control – This parameter provides the
Figure 30.
6.E.12 Login
See Section 6.B on page 42
Screen 44. Touch the lock on any screen.
Page 65