COPPER BRUTE II (500 - 2000) INSTALLATION AND OPERATING INSTRUCTIONS
Figure 19.
presence of this sensor and initiates a call for heat
When connected, this temperature is shown on the
supplied loose with the Copper Brute ll and is installed
connected, the controller automatically detects the
outdoor reset and warm weather shutdown can be
5.C.1.e
adhere to the polarity designations shown on the label
5.C.2
5.C.2.a
Dry Contacts
controller closes the normally open set of contacts
Alarm: These contacts, when used, are connected
controller closes the normally open set of contacts
whenever the Copper Brute ll is locked out or power
this is a dry contact, the system pump contact must
be wired with either the system pump supply voltage
Page 33
Detail