Table of Contents
Advertisement
Quick Links
Users Manual
FOR YOUR SAFETY: This product must be installed and serviced by a professional service technician,
qualified in hot water boiler and heater installation and maintenance. Improper installation and/or operation
could create carbon monoxide gas in flue gases which could cause serious injury, property damage, or
death. Improper installation and/or operation will void the warranty.
If the information in this manual is not
followed exactly, a fire or explosion may
result causing property damage, personal
injury or loss of life.
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not
use any phone in your building.
• Immediately call your gas supplier from a
nearby phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed
by a qualified installer, service agency, or gas
supplier.
WARNING
Users Manual for
Brute LX
Wall-Mounted Modulating Boiler
Model BLXH
50, 75, 100, 125, 150, 175 & 220 MBH
Combination
Boiler and Water Heater
Model BLXC
Assurez-vous de bien suivres les instructions
données dans cette notice pour réduire au
minimum le risque d'incendie ou d'explosion
ou pour éviter tout dommage matériel, toute
blessure ou la mort.
Ne pas entreposer ni utiliser d'essence ni
d'autres vapeurs ou liquides inflammables dans
le voisinage de cet appareil ou de tout autre
appareil.
QUE FAIRE SI VOUS SENTEZ UNE ODEUR DE GAZ:
• Ne pas tenter d'allumer d'appareils.
• Ne touchez à aucun interrupteur. Ne pas vous servir
des téléphones dansle bâtiment où vous êtes.
• Appelez immédiatement votre fournisseur de
gaz depuis un voisin. Suivez les instructions
du fournisseur.
• Si vous ne pouvez rejoindre le fournisseur de
gaz, appelez le sservice des incendies.
L'installation et l'entretien doivent être assurés par
un installateur ou un service d'entretien qualifié ou
par le fournisseur de gaz.
Document 1296A
125, 150 and 175 MBH
AVERTISSEMENT
Advertisement
Table of Contents
Related Manuals for Bradford White Brute LX BLXCW-125
Summary of Contents for Bradford White Brute LX BLXCW-125
- Page 1 Users Manual Document 1296A Users Manual for Brute LX Wall-Mounted Modulating Boiler Model BLXH 50, 75, 100, 125, 150, 175 & 220 MBH Combination Boiler and Water Heater Model BLXC 125, 150 and 175 MBH FOR YOUR SAFETY: This product must be installed and serviced by a professional service technician, qualified in hot water boiler and heater installation and maintenance.
-
Page 2: General Information
WARNING Brute LX Brute LX units must be installed in accordance with the procedures detailed in this manual, or the Bradford White warranty will be voided. The installation must conform to the requirements of the local jurisdiction having authority, and, in the United States, to the latest edition of the National Fuel Gas Code, ANSI Z223.1/NFPA54. In Canada, the installation must conform to the latest edition of CSA B149.1 Natural Gas and Propane Gas Installation Code, and/... -
Page 3: User Interface
Page 2 BRADFORD WHITE CORP . Page 1 Brute LX 1.5 Brute LX, Overview GAS SUPPLY CENTRAL HEAT OUT CONNECTION (SUPPLY WATER) CENTRAL HEAT IN CONNECTION (RETURN WATER) BOTTOM VIEW 2 SCREWS USER INTERFACE ON / OFF SWITCH HOT OUT... -
Page 4: General Care
Page 2 BRADFORD WHITE CORP . “open” position, allowing air to purge from boiler 1. Caring For Your Brute LX loop. Valve is normally in DHW position until Your Brute LX will require very little there is a call for Central Heat via “T-T” contacts. - Page 5 WAIT FIVE (5) MINUTES. Contact your installing contractor, gas utility, Set the aquastat or thermostat to its lowest setting. Bradford White dealer, or call Bradford White for the Open all manual gas valves. nearest authorized representative in your area. Reset all safety switches (pressure switch, manual reset high limit, etc.).
- Page 6 Page 4 BRADFORD WHITE CORP . 3. The User Interface and the until U00 is displayed. Press ‘Select/OK’ again and then release. Change the value to 15 and then press ‘Select/OK’ Digital Display again. The INSTALLER Mode Parameters will then be accessible by pressing the Up or Down arrows.
-
Page 7: Modulation Control
Page 5 Brute LX connected. Repeat this process for Terminal B and valve will shift position, allowing boiler water to enter GND. the building’s heating loop. Only after the value shifts To configure the control system, identify which position will the firing sequence begin. boiler is going to be the “master”... - Page 8 BRADFORD WHITE CORP . Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. 200 Lafayette St. www.BradfordWhite.com Middleville, MI 49333 Warranty: (800) 531-2111 Litho in U.S.A. © Bradford White 1410 Document 1296A-BW...
Need help?
Do you have a question about the Brute LX BLXCW-125 and is the answer not in the manual?
Questions and answers