Table of Contents
Advertisement
SATA Controller(s)
Enable or disable Serial ATA controllers.
SATA Speed
Select Serial ATA device speed from Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s), Gen 3 (6
Gbit/s) or auto.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller
Interface).
RAID Mode
This option allows you to create RAID using Intel
Serial ATA devices. For more information, please see Chapter 9 - RAID.
Serial ATA Port 0 to 5 and Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
Note that for SD330-H110, the SATA port will be numbered from 0 to 3. And for
SD330-Q170,
it will be numbered from 0 to 4 (port 4 controls the signal of the Mini PCIe
slot).
Chapter 7 BIOS Setup
Chapter 7
®
Rapid Storage Technology on the
USB Configuration
This section configures the parameters of the USB devices.
Legacy USB Support
Disabled
Disable USB keyboard/mouse/storage support.
Enabled
Enable USB keyboard/mouse/storage support.
UEFI Only
Enable USB keyboard/mouse/storage support only under the UEFI environment.
XHCI Hand-off
Enable this item for operating systems that do not support xHCI Hand-off. The XHCI
ownership change will be claimed by the XHCI driver.
54
www.dfi.com
Advertisement
Table of Contents
