Table of Contents
Advertisement
1. Slide the HDD drive tray back to the system and secure it with the thumb screws.
2. Connect the SATA data cable and power cable to the connectors on the SATA drive. And con-
nect the other end of the SATA data cable on the motherboard.
Chapter 3 Installing Devices
Chapter 3
Installing More Than One SATA Drive (Optional)
To install more than one 2.5" SATA drive, use the 5.25" optical drive tray. And to install more than
one 3.5" SATA drive, please order another HDD drive tray as shown in the following procedure.
For 3�5" SATA Drives
Use the following procedure to install a second 3.5" HDD/SSD:
1.
Secure the hard drive to the drive tray. Align the mounting holes on the SATA drive with the
mounting holes on the HDD drive tray. Use 4 mounting screws to install the hard drive onto
the HDD drive tray.
Drive bay
2.
Slide the HDD drive tray with the installed hard drive into the optical drive bay and secure
the installation with the thumb screws.
18
Mounting screw
Mounting screw
www.dfi.com
Advertisement
Table of Contents
