DFI WM343-SD330 User Manual page 19

For 2�5" SATA Drives
Use the following procedure to install a second and third 2.5" HDD/SSD:
1. Attach 4 standoffs to the 2.5" HDD or SSD.
2. Secure the hard drive to the optical drive tray. Align the standoffs on the HDD with the
mounting holes on the optical drive tray. Use 4 mounting screws to install the hard drive
onto the optical drive tray.
Chapter 3 Installing Devices
Chapter 3
3. Install the optical drive tray back to the system.
4. Connect the SATA data cable and power cable to the connectors on the SATA drive. And connect
the other end of the SATA data cable on the motherboard.
Mounting screw
Mounting screw
Mounting screw
Mounting screw
19
www.dfi.com