Table of Contents
Advertisement
1.
Align the notch on the DIMM with the tab in the DIMM socket.
2.
Press down on the DIMM until the release tabs spring back to secure the DIMM in place.
Chapter 3 Installing Devices
Chapter 3
Installing a CPU
1. Make sure the system and all other peripheral devices connected to it have been powered-off.
2. Disconnect all power cords and cables.
3.
The system board is equipped with a surface mount LGA 1151 socket. This socket is exclu-
sively designed for installing a LGA 1151 packaged Intel CPU.
Important:
1. Before you proceed, make sure (1) the LGA 1151 socket comes with a protective
The installed DIMM
2. Keep the protective cap. RMA requests will be accepted and processed only if the
4. Unlock the socket by pushing the load lever down, move it sideways until it is released
from the retention tab, and then lift the load lever up.
14
cap, (2) the cap is not damaged and (3) the socket's contact pins are not bent. If
the cap is missing or the cap or contact pins are damaged, contact your dealer im-
mediately.
LGA 1151 socket comes with the protective cap.
Load lever
Protective
cap
www.dfi.com
Advertisement
Table of Contents
