Table of Contents
Advertisement
7. Select "Change Intel(R) ME Password" and then press "Enter".
You will be prompted for a password. The default password is "admin". Enter the default
password in the space provided under "Intel(R) ME New Password" and then press "Enter".
• 8-32 characters
• Strong 7-bit ASCII characters excluding : , and " characters
• At least one digit character (0, 1, ...9)
• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)
• Both lower case and upper case characters
Intel(R) Management Engine BIOS Extension v11.0.0.0010/Intel(R) ME v11.8.50.3399
Copyright(C) 2003-16 Intel Corporation. All Rights Reserved
INTEL (R) ME PLATFORM CONFIGURATION
Change ME Password
Local FW Update
<Enabled>
Intel(R) ME New Password
Intel (R) ME New Password
[↑↓] = Move Highlight
[Enter] = Select Entry
Chapter 10 Intel AMT Settings
Chapter 6
Chapter 10
[Esc]= Exit
85
8.
Select "Local FW Update" and then press "Enter". Select "Enabled" or "Disabled" or
"Password Protected" and then press "Enter".
Intel(R) Management Engine BIOS Extension v11.0.0.0010/Intel(R) ME v11.8.50.3399
Copyright(C) 2003-16 Intel Corporation. All Rights Reserved
INTEL (R) ME PLATFORM CONFIGURATION
Change ME Password
Local FW Update
<Enabled>
Disabled
Enabled
Password Protected
[↑↓] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
9.
Select Previous Menu until you return to the "Main Menu". Select "Intel(R) AMT Configu-
ration" and then press "Enter".
Intel(R) Management Engine BIOS Extension v11.0.0.0010/Intel(R) ME v11.8.50.3399
Copyright(C) 2003-16 Intel Corporation. All Rights Reserved
MAIN MENU
> Intel(R) ME General Settings
> Intel(R) AMT Configuration
MEBx Exit
[↑↓] =Move Highlight
[Enter] =Select Entry
[Esc] =Exit
www.dfi.com
Advertisement
Table of Contents
