SMC100CC & SMC100PP
11.0
Maintenance and Service
EDH0206En2042 – 04/16
11.1
Enclosure Cleaning
The SMC100CC/PP Controller/Driver should only be cleaned with a lightly damped
cloth or sponge with a soapy water solution. Do not use an acetone or alcohol solution,
this will damage the finish of the enclosure.
11.2
Obtaining Service
The SMC100CC/PP Controller/Driver contains no user serviceable parts. To obtain
information regarding factory service, contact Newport Corporation or your Newport
representative. Please have the following information available:
• Instrument model number (on front panel).
• Instrument serial number (on rear panel) or original order number.
• Description of the problem.
If the instrument is to be returned to Newport Corporation, you will be given a Return
Number, which you should reference in your shipping documents.
Complete a copy of the Service Form as represented on the next page and include it
with your shipment.
Single-Axis Motion Controller/Driver for DC or Stepper Motor
76