Cd-Cp00 Network Setup; Figure 5 Cd-Cpoo Network Setup - NEC UNIVERGE SV8100 Configuration Manual

Issue 1.0
3.2
8

CD-CP00 Network Setup

Values shown are for example purposes only. Your actual IP values will be
determined by your local LAN administrator.

Figure 5 CD-CPOO Network Setup

10-12-01 : CD-CP00 Network Setup – IP Address
Set the LAN IP address for the system ethernet port to 0.0.0.0.
10-12-02 : CD-CP00 Network Setup – Subnet Mask
Set the subnet mask for the system ethernet port to be different than the subnet
for the IPLA blade.
10-12-03 : CD-CP00 Network Setup – Default Gateway
Set the default gateway for the IPLA blade.
If a router or firewall is placed between the SIP Trunk Provider and SV8100,
you must also set the following programs:
10-12-06 : CD-CP00 Network Setup – NAPT Router
Turn this program on if the SV8100 resides behind a NAT router.
10-12-07 : CD-CP00 Network Setup – NAPT Router IP Address
Set the WAN IP address of the NAT router behind the SV8100.
SIP Trunking Service Configuration Guide
Windstream